Get a piece of tape. An easy way to remove glitter is to get a piece of adhesive tape. You can try using a wide masking tape or packaging tape. However, do not use electric or duct tape since these can damage the garment by leaving behind a sticky adhesive. Cut out a wide strip of tape and gently press it down on the area that has the glitter you want to remove. Press down on the tape gently so the lint and glitter will stick to the tape. As you pull off the tape, the glitter should be transferred to the tape and should no longer be on the fabric.
Check out the auction that is always happening at eBay. Look for the link or search for queen size clothes and bid on the items that are available. GGDB Sale Make sure that the items come with a warranty and good return and refund policies as you can only actually inspect the item once you have received the shipment. Pictures may look very different from the actual item.
The new spark plug will sit in the block at an angle. Be very careful not to cross thread it into the block. Make sure it's fairly snug to create the seal needed for compression to peak. Next you will want to follow the wire back to the distributor cap and replace them one at a time as you replace the spark plugs one at a time to keep the firing order. Rub a little Vaseline on the tip of the spark plug, and push the longer boot onto the spark plug tip straight in. You should feel a small click as the internal clip seats on the tip. Next push the other end http://www.goldengoosestar.com/ of the wire onto the tip on the distributor cap. There is no need for Vaseline or special steps here yet. Repeat these steps for each spark plug until there all replaced.